How to Install Roller Blinds
Installing roller blinds is an easy and straightforward process. All you need is a few simple tools, some basic instructions and a little bit of patience. With the right preparation and know-how, you can easily have your new window coverings up in no time!
What You’ll Need
If you are installing roller blinds, there are a few tools and equipment you will need. Most of the items required can be found in any hardware store. The basic tools you should have on hand include:
- Power drill & drill bits
- Screwdriver
- Pliers
- Pencil
- Measuring tape or ruler
- Level
- Hammer
- Utility knife
- Screw eyes
You may also need to purchase screws or other mounting hardware specific to your blinds depending on the type being installed. It is also helpful to have some sandpaper handy for smoothing out rough edges if needed. Once all the necessary tools and materials are collected it’s time to begin installation of your roller blinds!
Step 1: Measuring & Assessment
To begin with, make sure you’ve measured up correctly—it’s important to get the dimensions spot on to ensure your blinds fit perfectly. Once this is done, decide what type of installation kit will work best for your particular window frame. It may be as basic as brackets that attach directly onto the wall or ceiling (for inside mount installations), or if your windows are quite deep you could opt for a side-mount or outside mount kit.
Step 2: Brackets, Screws & Fittings
Next, attach the brackets to your window frame following the instructions provided in your chosen installation kit. When you’re happy with their positioning, screw them into place securely. Now it’s time to fit your blinds! Place the bottom bar of the blind into the bracket and make sure it’s sitting level before fixing in place with screws.
Step 3: Final Steps
The last step is very important—check all of your screws are tightened correctly so that everything is secure. With this done you should have a great-looking roller blind installation ready to go! Enjoy your new window coverings and enjoy the extra privacy and light control they provide. Happy installing!
Tips to Remember
- Measure your window correctly before you purchase a roller blind. Accurate measurements ensure that the blind fits properly and looks neat.
- Use a level when installing to make sure the bracket is straight and even.
- Check that all parts are included in the package before you start the installation process.
- Follow instructions carefully and make sure the mounting screws are securely tightened so they don’t come loose over time.
- Securely attach cords to wall or floor anchors, away from children's reach to avoid strangulation risk, using cord cleats provided with some roller blinds or simple tie-downs for others without them.
Save Time & Eliminate Frustration
If you don’t want to install your new roller blinds yourself, leave it to the professionals at Design 2000 Blinds & Awnings. We will get the job done promptly, professionally and at a price that won’t hurt your hip pocket. Our expert team service clients throughout the Central Coast. You can call us on (02) 4353 2988 or fill out our online contact form.
